Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Astra in limp mode

  1. #11
    Join Date
    Nov 2013


    The nightmare continues! Apparently it's a broken wire so my mechanic says hence why it's not storing the codes in the ecu. His solution is to replace the wiring loom for the accelerator pedal. Apparently this is a big job. Is it? Help,I haven't got a clue,lol

  2. #12
    Join Date
    Aug 2010


    The codes from the pedal test came from the ecu so there are codes in there I would have somone look at the live readings as the pedal is pressed down see if there is any glitches on the potentiometer in the throttle pedal before the loom is replaced.

    Miss breakdown

  3. #13
    Join Date
    Nov 2013

    Default astra limp mode

    What fault code are there?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Follow RAC:

Sales enquiries:

0330 159 1111

03 numbers are charged at national call rates and included in inclusive minute plans from landlines and mobiles. Calls may be monitored and/or recorded