[InfoA]

Hi,

Im new here and do not know anything about cars...please help me. I just bought 2010 Fiesta 1.4 TDCi and checked engine oil which looks like not enough and completely black (see picture below). So I decided to drive in come cheap service in Dewsbury and change it. But in my surprise, after change oil and filter yesterday I checked it this morning on cold engine and looks like now its too much oil and its same black color. (See video). Is that must be in this way?

Picture before:

https://drive.google.com/open?id=1bw...ibrhCXNhEeMBJ0

Video after:

https://drive.google.com/file/d/10-Ptw6btjsKTf0kzUlHQJYIwbQO7M8u1/view?usp=sharing

[InfoA]

https://drive.google.com/file/d/10-P...ew?usp=sharing

[wagolynn]

I would go back to where you had the oil change, and ask them to change the oil free of charge.

Some of these places use a probe that they insert into the dipstick hole to pump out the old oil, if this does not work properly the old oil is not removed.
https://www.bing.com/videos/search?q...B3E3&FORM=VIRE

They then put in a measured amount of new oil, and that's the job done.
It looks as though the old oil was not fully removed, so the new oil was added to it, so you now have too much, and it's mixed old and new.

I would find the oil filter, and see if it looks clean outside, if it is they did change it, if not then they missed that as well.

Diesel's oil gets dirty looking fairly quickly so best to change it at mileage or once per year as Ford recommend.

[Hometune]

The oil level was okay in the first post. There are 4 lines and it was on the first one. Forget the cheap place in Dewsbury - I know them all and they are cheap for a reason - and go to Kwik Fit to have it sorted. I cannot recommend a decent garage in the town.

[InfoA]

Thanks guys for answers, I will check it!