Results 1 to 2 of 2

Thread: Renault drivebelt

  1. #1
    Join Date
    Aug 2014
    Posts
    2

    Default Renault drivebelt

    Hi there i have a renault clio cup 172 2003, its got a problem with the drive belt. it used to run very close to the cambelt cover, it frayed a tiny piece off but i didnt notice this till the other day, iv recently put a pas pump on it and replaced the drive belt but now every time i start it up the drive belt moves over on the crank pulley and starts to cut into the cambelt cover. I can feel the belt when i tighten it up and its fully on every pulley and as soon as it starts it moves over. Iv checked all the other pulleys and i cant seem to fault any of them, iv even replaced the crank pulley and no change. Any ideas id be very greatfull iv been stuck on it a week now lol

  2. #2
    Join Date
    Aug 2011
    Posts
    2,455

    Default

    Someone else on another thread has got this same problem, actually.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •